FREE return shipping!
(805) 640-8883
Deutsch | Français | English

Our transfer equipment

We use a telecine xenon flash scanner. Here are some of the parts of our system.

Our Camera


Because many of you asked, we show you the type of camera we use. It's a professional JVC video camera, model GY-HM750U. What makes it distinctive is its 3CCD image sensor.

Having a 3CCD sensor, and not just a CCD or CMOS sensor, is critical in capturing a true image. The camera provides an HD-SDI output signal, which holds the 10bit Full-HD image information. That HD-SDI signal gets captured by a computer.

The extra color depth of our 10bit, over most transfer houses' 8bit, provides  a more refined range for precision color-grading.  The camera is pricey but worth it!

3CCD professional JVC camera model GY-HM750U

Lens


The lens we is the sharpest 60mm macro lens Canon makes. It's from their EFS series. The lens is held by a special lens holder which allows us to finely tune the image framing getting your whole image perfectly framed during our initial capture.

Flash Scanner Control Box


This is the brain of our flash scanner. The box uses two 8-core microprocessors to control all the required elements of the flash scanner.

The five elements are:  the motor and video signal interlock, the strobe laser interlock, the color of the light, the light intensity automation control with added manual override for fine adjustments, and the mechanical adjustment required for any varying shrinkage of the film.

8mm flash scanner control box

Our 8mm Xenon Light Flash Scanner


The skeleton of our scanner is a studio class Bauer projector.

The robust German machine (frame) provides the films transport and a stereo duo-play sound playback. Removed from this frame were the original motor, the mechanism of the pull-down claw, the lens, and the gear wheels. They were replaced with a new motor, new interchangeable gear wheels for 8mm and Super-8 film, a new light (a xenon light strobe with color filters and diffuser), a film density reader that pre-reads the film for any required automated exposure corrections, and a laser that reads the sprocket holes' edge for proper strobe timing.

The optics for the light, includes a special encasing, color filters, IR and UV filters to protect your film from the light, light diffusers, encoders, servos, and a whole range of electronics.

Shown here is the laser and the light of the film density reader.

Sound


Many films did not have sound, but for those that did, we keep the sound interlocked to the image as your film gets scanned, frame by frame. In addition we record, in parallel, the analog sound at an extreme high sample rate of 192kHz. This recording replaces the camera's inferior sample rate sound. This extra step allows for a true 48kHz sound rate, even after we do our final slowing down for playback at proper speed.

Transfer Operator


And yes ... that's me! A Brooks Institute graduate*  at the controls during every frame of your transferred film. I watch very carefully and adjust the light making sure all is going well.  *Santa Barbara, CA - 1996 - official diploma appears on our website

Manual light adjustments during transfer allow for a more fine-tuned capture.


 

Some Images


Laser with micrometer adjusters to fine tune laser positioning


Laser reading edge of Super-8 film sprocket hole.


Locking down the light rod along the path the xenon light is traveling


 

 

 

 

 

We don't use substandard, non-professional equipment.


If you are intent on transferring the film yourself, you may have considered using one of the inexpensive models appearing on the market several years ago.  It is wise not to expect decent results from these, and be prepared to invest a inordinate amount of time for each reel.

May we boast for a moment? Our work is clearly superior to those DIY transfers for several reasons. (Send us a small free, 3" Test-Transfer reel -- we often run a special. Look for details on our website.)

Also, those machines will not capture sound, if your film happens to have a sound strip. However, we will capture it -- at no extra cost!  The sweet voices get perfectly interlocked and synced up with the film's image.



Professional Film Transfer Services - Located in Ojai, CA 93023 - Santa Barbara and Ventura Area
©2018 - all rights reserved - filmfix.com, filmfix.ch, filmfix.eu & filmfix.net
website:poweryourpoint.comwebsite admin